What this video covers
Full unboxing and assembly of the GhostCat F3X Pro.
Steps
- Open the box, verify orientation, remove styrofoam, and cut loose the accessories.
- Align the handlebars with the zero center-mark, then install the rear suspension.
- Install the front fender (long side forward) and snug with a 5 mm Allen.
- Install the front wheel: loosen the four KKE pinch bolts, remove the end cap (leave the axle slightly in the dropout), pull the brake stopper pad, align the rotor to the caliper, twist the axle through, refit the end cap, then tighten the pinch bolts outside-to-inside with good torque.
- Install the pedals (reverse-threaded; grease the threads) and the kickstand (behind the frame, with lock nuts).
- Mount the LCD display (USB port down) and handle control.
- Install the number plate — keep the main cable harness behind the headlight and the front brake line + shifter cable in front of the plate so they move freely. Secure with zip ties.