Lekkie Pacemaker Throttle – F-Series/Saber S1

The Lekkie Pacemaker is a precision CNC full twist throttle, customized for GhostCat with our 5-pin plug so it connects straight to your bike's existing throttle harness. No adapters, no extra parts and no controller programming.

Compared with the stock throttle, the Pacemaker eliminates the dead zone at the start of the twist and gives a smoother, more progressive throttle curve. Power comes in exactly when you ask for it, which makes low-speed control on trails, in traffic and on technical climbs much easier.

Highlights

• Plug and play on GhostCat F-Series bikes and the Saber S1 (GhostCat 5-pin plug)
• No dead zone and an improved throttle curve for precise, predictable power
• Full twist, motorcycle-style throttle that snaps back to zero when released
• CNC-machined 6061-T6 aluminum housing and lock-on clamps, anodized black
• Soft rubber lock-on grips that won't slip in the wet (grips are replaceable)
• Low-profile design fits under most shifters
• Blue LED on the sensor shows when the system is live
• Electrically sealed components for all-weather riding
• Impact-resistant plastic end cap
• Fits 22.2mm handlebars, 152 g for the pair

Compatibility

Made only for GhostCat bikes: the F-Series (F2, F2.2, F3, F3.2, F3.3, F3X, F3X Class 2, F3X.2 Pro, F4X and F4X Hunter's Edition) and the Saber S1. The custom 5-pin plug will not connect to other brands' e-bikes. Right-hand twist throttle.

What's in the box

• Lekkie Pacemaker twist throttle with grip (right hand)
• Matching lock-on left grip

Installation

Remove your existing throttle and left grip. Slide the Pacemaker onto the right side of the bar (allow about 150mm of bar on the right and 130mm on the left), tighten the clamp with a 2.5mm hex key (2 Nm max), and plug it into your bike's 5-pin throttle connector. Before riding, check that the throttle snaps back to zero when released. Need help? Our Help Center and support team are here for you.

Designed by Lekkie in New Zealand. Customized for GhostCat.