GhostCat F3X Routing the Front Brake Cord
What this video covers Correctly routing the front brake hose on the F3X so it doesn't kink under suspension travel. The fix From the factory the hose clamp is often...
Ryan Selewicz |
Help Center
GhostCat F3X Routing the Front Brake Cord
-
How to Fix a Broken E-Bike Brake Lever. GhostCat F2.2 Pro
What this video covers Replacing a broken hydraulic brake lever on the F2.2 Pro (and similar hydraulic setups). Steps Loosen the brake-lever retaining-pin locking bolt, then push the main retaining...
Ryan Selewicz |
-
Simple Derailleur Adjustment! GhostCat F2.2 Pro
What this video covers Adjusting the derailleur when the bike isn't shifting properly (Shimano Altus 7-speed). Steps Flip the bike upside down and rest the bars on stands to protect...
Ryan Selewicz |
-
Fix Rubbing Disk Brake! GhostCat F2.2 Pro
What this video covers Centering a rubbing disc-brake caliper so the pads clear the rotor (front and rear). Steps Loosen the top and bottom caliper mounting bolts. Squeeze and hold...
Ryan Selewicz |
-
Tapia Seat Install & Loose Controller Fix: GhostCat F3
What this video covers Installing a Tapia seat the right way, plus fixing a controller that rattles in its compartment. Steps Remove all the seat bolts (two at the back,...
Ryan Selewicz |
-
GhostCat Installing E bike Battery
What this video covers Correctly installing (and checking) the battery when your GhostCat won't turn on. Steps Check the battery first: press the "I" (ignition) button, then the power button...
Ryan Selewicz |
-
GhostCat F3X Front Wheel Installation
What this video covers Safely flipping the F3X and installing the front wheel on the DNM/KKE fork. Steps Flipping the bike: squeeze the rear brake, bring it up onto the...
Ryan Selewicz |
-
How to Remove the Controller on Ghostcat F3, F3X, F4X Pro
What this video covers Removing the controller (same process on the F3, F3X, and F4X) — for example to resolve a controller "03" error. Tools needed A ratchet with a...
Ryan Selewicz |
-
How to change Ghostcat Brake Pads
What this video covers Replacing worn brake pads (front or rear — the brakes are identical). No bleeding required. Steps Remove the caliper with a 5 mm (two bolts, top and...
Ryan Selewicz |
-
How to Change Ghostcat Display Functions on F3X Pro
What this video covers Unlocking the F3X Pro display and changing the advanced settings (speed and current limits). Steps Turn the bike on, then hold the minus + plus buttons...
Ryan Selewicz |
-
Ghostcat F3 & F3X Rear Wheel Removal
What this video covers Removing and reinstalling the rear wheel on the F3 / F3X Pro (for a flat or a motor gear change). Tools needed 4 mm and 5 mm Allen...
Ryan Selewicz |
-
Ghostcat F3X Pro Tutorial
What this video covers Full unboxing and assembly of the GhostCat F3X Pro. Steps Open the box, verify orientation, remove styrofoam, and cut loose the accessories. Align the handlebars with...
Ryan Selewicz |
-
GhostCat F3 Unboxing
What this video covers Step-by-step unboxing and assembly of the GhostCat F3. Tools needed Household scissors, a Phillips screwdriver, and the included Allen keys. Steps Cut the straps and tape,...
Ryan Selewicz |
